Back to the previous page, you can configure your preferences or simply press ok (these settings can be changed later). Here select in “Folder” field the path “/mnt/share1/music”: Then press the cross button near “Folder” label. Go back to browser and click on “Add Media Library”. Go back to terminal and create a folder by typing: sudo mkdir /media/usb0/share1/music Let’s try to create a music folder and add it to Music media library. So, the share folder upon configured will be available on /mnt/share1 (inside the container) even if it is available on RPI host at /media/usb0/share1. Remember that here you’ll map paths as seen inside Docker container, independently from host mount. NOTE: if you have an Emby account, here you can specify it. The following page asks the first user and its password. docker run -d -name emby-server -restart unless-stopped \Īt this point, you should be able to access in your favourite web browser with the address The first page, lets you choose the preferred language. The only thing to care is in downloading the right package, built for Armv7. Installing Emby Server via Docker is simple and fast. This should assure that at the boot it will be mounted on “/media/usb0”. NOTE: in next section I’ll assume that your USB Disk is the only disk plugged on RPI. Reboot to have it mounted and ready to be used for our docker volumes.
To format drive with the ext4 file system format: sudo mkfs.ext4 /dev/sda Be aware: this operation will erase ALL your data in your USB disk.Īccording with an askUbuntu guide ( ), identify the USB drive among all storage partitions and volumes on your computer use: lsblk The only way I found to have a working installation was to format in ext4 the flash disk. I experienced some issues formatting my USB disk in FAT32. Now, the simple command “mount” should list the following line within the other mounted devices: /dev/sda on /media/usb0 type vfat (rw,nodev,noexec,noatime,nodiratime,sync,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro) Prepare Your USB Device
Reboot the Raspberry PI and plug in your UDB Disk.
#Emby client on raspberry pi 3 install
Type on terminal: sudo apt install usbmount So, we need to be sure that at every boot the USB Disk will be ready, without struggling on mounting it from terminal. So, start from installing Raspberry PI OS Lite. Steb By Step Guide Prepare OS environment
0 kommentar(er)
